STEP 180 - Fail secure hookbolt strike

Application

For use where the electronic access control system must work together with a high security Connect hookbolt rather than the traditional latchbolt. The rapid operation of an electric strike, as compared to a motor lock, is recommended for high-traffic areas such as corridor doors and main entrances. These strikes are also recommended for rooms containing cash or valuables and areas where staff may be subject to attack.

 

All Hookbolt Strikes are supplied fitted with either faceplate 183 or 283, or 184 or 284, and with 5 m cable.

The strike is manufactured from stainless steel.

VERY HIGH strength - resists 1,500kg sidepressure on the pivoting staple.

Door handing must be specified when ordering.

Specification

DC continuous duty fail secure

The strike opens when the current is on and locks automatically when the current is switched off.

Two microswitches monitor the hookbolt engagement and the deadlocking of the pivoting staple.

Features receiver in faceplate for conventional latchbolt.

Handing must be specified when ordering.

Use references:
180A - left hand
180B - right hand.

Finish

Standards

EN 50081-1 (Emission)
EN 50082-2 (Immunity)

EMC 89/336/EEC
EMC 93/68/EEC

Ordering Options
35941710031
STEP 18 ST180-A LEFT HAND F/LOCKED 24VDC
35941810031
STEP 18 ST180-B RIGHT HAND F/LOCK 24VDC
35942110031
STEP 18 ST180-A12 LEFT HAND F/LOCKED 12V
35942210031
STEP 18 ST180-B12 LEFT HAND F/UNLOCK 12V